• 
  
  Alum-stainless- 18.5" x 18.5"
  Deluxe Turnplate Set
  Deluxe Alignment turnplates fits 18 1/2" by 18 1/2" space.
  Aluminum turnplates make our alignment lifts more accurate than ever.
• 
  
  Ramp Stops - For Four Post Lifts
  Ramp Stops Set of 4
  Optional Drive Up Ramp Locks, if desired to keep the Drive Up Ramps from Flipping down.
• 
  
  WSA -100 - 5210438
  Air / Electric Workstation Fits HD 9/12/14 Four Post Lifts
  The BendPak WSA-100 utility air-electric work station takes convenience to a whole new level. Mount the WSA-100 on your BendPak lift and turn it into a new one-stop workplace. Whose garage couldn't use a couple extra electrical and air outlets?
• 
  
  WSA -100 - 5210438
  Air / Electric Workstation Fits Two Post Lifts
  The BendPak WSA-100 utility air-electric work station takes convenience to a whole new level. Mount the WSA-100 on your BendPak lift and turn it into a new one-stop workplace. Whose garage couldn't use a couple extra electrical and air outlets?
• 
  
  WSA -100 - 5210436
  Air / Electric Workstation Fits HD/HDS 18/27/35/40 Four Post Lifts
  The BendPak WSA-100 utility air-electric work station takes convenience to a whole new level. Mount the WSA-100 on your BendPak lift and turn it into a new one-stop workplace. Whose garage couldn't use a couple extra electrical and air outlets?
• 
  
  Lift Pads - 5215756 35mm
  Steel Lift Pads
  Designed for high-volume shops that are constantly loading / unloading vehicles, this pack of lift pads is perfect for your BendPak two-post lift.
• 
  
  RJ-45
  4,500 Lb. Capacity, Rolling Bridge Jack
  BendPak RJ-45 rolling bridge jacks are designed to hold up to 4,500 lbs. Use the RJ-45 bridge jack with your BendPak HD-9 4-Post series car lift. Rolling bridge jacks offer a great alternative to two-post car lifts.
• 
  
  Pads -5215508 35mm
  Adjustable Screw Lift Pads With Receiver
  These adjustable round screw lift pads give an additional 3" of lift to 9,000 and 10,000-lb. BendPak two-post lifts. For old series "XPR" models only
• 
  
  Telescoping Screw pads-60mm
  Telescoping Screw Pad Assy.
  These adjustable telescoping round screw lift pads for the XPR "S" series give an additional 3" of lift to 9,000 and 10,000-lb. BendPak two-post lifts. For new series "XPR" models only. Rubber top screw pad comes with one receiver. 60mm screw.
• 
  
  Rubber Pads - 5715365 Square
  Rubber Lift Pad - Slip Over
  These rubber lift pads outfit your BendPak two-post with extra carriage-gripping capabilities. Textured surface reduces migration, and the slip-over design makes installation a snap.
• 
  
  Aluminum Deck -5210207
  Platform Fits HD-7P HD-7W HD-9ST HD-9 / NARROW Runway Setting
  The optional Solid Deck makes your BendPak HD-9 Series 4-Post lift even more versatile with room for storage and fluid-protection for flooring and vehicles.
• 
  
  Drip Trays (Set of 2) - 5700301
  Polypropylene Drip Trays for Four-Post Car Lifts
  A light-weight, cost-effective solution to drips, these drip trays will catch harmful fluids and keep them in one place to protect your vehicles and garage flooring. Sold in sets of two.
• 
  
  Frame Cradle Pad-5215506 35mm
  Frame Cradle Pad / Set of 4
  If you've got a heavy vehicle to lift, especially a truck, then you're going to want a set of these BendPak Frame Cradle Pads. Sturdy steel construction keeps the frame firmly between the lips, while the treaded rubber mats protect the finish and reduce the chance of slippage. Does not fit "S" series models. Shipping charges apply to parts purchases.
• 
  
  Aluminum Deck /Short-Wide
  Platform Fits HD-7P HD-7W HD-9ST HD-9 / WIDE Runway Setting
  The optional Solid Deck makes your BendPak HD-9 Series 4-Post lift even more versatile with room for storage and fluid-protection for flooring and vehicles.
• 
  
  Aluminum Deck -5210174
  Platform Fits HD-7PXW HD-7PXN HD-9STX HD-9XW HD-9XL / NARROW
  The optional Solid Deck makes your BendPak HD-9 Series 4-Post lift even more versatile with room for storage and fluid-protection for flooring and vehicles.
• 
  
  Aluminum Deck -5210208
  Platform Fits HD-7PXW HD-7PXN HD-9STX HD-9XW HD-9XL / WIDE
  The optional Solid Deck makes your BendPak HD-9 Series 4-Post lift even more versatile with room for storage and fluid-protection for flooring and vehicles.
• 
  
  Tuf-Pads™ - 5715017
  Contact Pads - Two-Post Lift
  These Polyurethane lift pads outfit your BendPak two-post with extra carriage-gripping capabilities. Textured surface reduces migration, and the slip-over design makes installation a snap. Round design offers extra multi-directional grip.
• 
  
  MLS-18 - 5175001
  Jack Stand - Mobile High-Lift
  For extra support exactly where you need it most, count on the BendPak MLS-18 Mobile High-Lift Jack Stands. They're capable of holding up to 18,000 lbs. each!
• 
  
  LR-4A Optional Arm Kit
  LR-4A Arm Kit Fits / LR-60 / LR-60P / P-6 / P-6F
  Easy-to-use optional arm kit fits BendPak low-rise models LR-60, LR-60P, P-6 and P-6F.
• 
  
  Offset Adapters 35mm - 5601179
  Swing Arm Offset Adapters for Two-Post Car Lifts
  Offset adapter design allows operators to easily position lift points without the need for constant arm tube adjustment.
• 
  
  JP-6 (bottle jacks not included)
  Sliding Jack Platform for Runway Lifts - 6,000-lb. Capacity
  This convenient sliding jack is capable of lifting 6,000 lbs. Designed specifically for use with four-post style runway lifts, lube racks and quick-lube pits. Bottle Jacks NOT included
• 
  
  DP-30
  Rolling Drain Pan for Four-Post Lifts - 18-Gallon
  Use the 15-Gallon Rolling Oil Drain Pan to perform fluid changes with your lube rack, quick-lube pit or BendPak four-post lift.
• 
  
  Caster Kit - 5210997
  Portable Wheel Kit / Fits HD-7 and HD-9 Series Lifts
  Mobilize your BendPak HD-9 4-Post Lift with this high-quality caster kit. Move your BendPak four post car lift all around the shop and avoid inconvenient tear-down and re-assembly time.
• 
  
  5174008
  Airline Kit for XR Series Scissors Lifts
  This integrated rolling bridge airline kit mounts and secures your airline to the bottom of your lift's runways, creating a tidy airline solution for your rolling bridge jacks.
• 
  
  Adapter Kit 5210367
  RJ-45 Specialty Adapter Kit / Includes (2) Sliding Pads and (2) Sliding Receivers
  This four‐piece adapter set increases the service capability of the BendPak RJ‐45 rolling bridge jack by providing sliding adapters that mount on the main center tube.
  
  Parts are subject to shipping costs
• 
  
  5174010-HD-18/27/35
  Airline Kit for HD-18/27/35
  This integrated rolling bridge airline kit mounts and secures your airline to the bottom of your lift's runways, creating a tidy airline solution for your rolling bridge jacks.
• 
  
  EXT 48" Ramp HD-9SW/SWX
  Four-Post Car Lift Aluminum Approach Ramps
  These optional aluminum approach ramps 48" Aluminum Ramp Kit / Fits BendPak HD-9SW/SWX Lifts and HD 9AE lifts ONLY / Pair
  and replace the standard steel approach ramps.
• 
  
  Ramps 36" fit HD-7, HD -9
  Four-Post Car Lift Aluminum Approach Ramps
  These optional aluminum approach ramps fit all BendPak HD-7 and HD-9 Series lifts and replace the standard steel approach ramps. 36" (not HD-9SW/SWX models) / Pair
• 
  
  Spacer Roll Back Bar HDS14
  Turning Radius Plate Spacer Roll-Back Bar - Alignment Lifts
  These specially machined bars act as a bridge between the runways and the turn plates on BendPak alignment lifts. Also referred to as "turning Radius plate spacers".
• 
  
  Spacer Roll Back Bar HD-9AE
  Turning Radius Plate Spacer Roll-Back Bar - Alignment Lifts
  These specially machined bars act as a bridge between the runways and the turn plates on BendPak alignment lifts. Also referred to as "turning Radius plate spacers".

Deck out your car lift with the latest accessories from BendPak. It's all in the details.

Whether it's specialty lifting pad for a specific lifting project or a set of casters for lift mobility, we've got you covered. Even if you're finding that more and more of your business is coming from low-profile cars, we manufacture an arm adapter to lift them straight from the floor. Whatever your situation is, we've got just the thing to fully customize your two-post, four-post, parking, wheel alignment or specialty lift.

View our full Wrenchers Warehouse offering of BendPak car lift products!