Name:

Model:

Price:

When you need to add versatility and productivity to your shop or garage, your first stop should always be BendPak. The SP-7X is the mighty 7,000-lb., full-rise scissor lift that won't hog your precious floorspace and fits nicely into narrower bays. A frame engaging lift, it easily accommodates most passenger vehicles and light trucks and comes replete with pneumatic safety locks, rubber lifting blocks and an open center for full under-car accessibility. Always bet on BendPak for increased durability, safety and productivity. You aren't going find comparable quality or value anywhere else—BendPak always bests the rest.

Electric / hydraulic power system
We incorporate maintenance-free electric hydraulic power systems into each lift for ultimate dependability, and all controls are conveniently located within close reach.

Dual-cylinder design
Each scissor lift is equipped with 2 hydraulic cylinders for maximum performance, reliability and precise leveling. The dual-cylinder design maintains constant level and safety using cross flow hydraulic technology, pressure flow control and integrated velocity fuses. Our industrial-grade hydraulic cylinders feature a single-piece, pilot fitted, machined steel piston, wrapped with specially designed, pressure loaded U-cup piston seals, backups and wear bands to virtually eliminate fluid bypass. The micro-smooth chrome-rod is machined from high-yield, ground and polished C-1045/50 micro-alloy steel and plated to a minimum of .001" diametrically, to ensure superior cylinder operation and life. The superior-designed high durometer, mechanically-loaded rod seals make rod leakage is a thing of the past while a specially formulated abrasion-resistant urethane rod wiper provides exclusion protection. The welded cylinder body is made from robust steel tubing produced to exceed ASTM specifications. This combination of superb base material and superior processing ensures that the cylinders remain straight, smooth and last a very long time. An integrated flow restrictor provides a controlled descent in the case of an unexpected hose rupture.

Large base frame
Heavy boxed-steel formed base frame provides solid stability. SP-7X-SP-7X-VW Flush Dimentions

*Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2006 or ANSI/UL 201. Consult www.autolift.org for complete listings or contact Wrenchers Warehouse via contact@wrencherswarehouse.com

• 7,000-lb. lifting capacity
• Extended pull-out top lift platform
• Pneumatic safety locks
• Equalization torsion bar
• Hardened pivot pins with "Zirk" fittings
• Open-center design
• Ergonomic controls
• Dual-cylinder hydraulic design provides extra power
• Low-profile
  
  

• Lifting capacity: 7,000 lbs. / 3,175 kg
• Max lifting height: 68" / 1,727 mm
• Overall length: 163-1/2" / 4,153 mm
• Overall width: 74-1/2" / 1,892 mm
• Lift platform: 21-1/2" x 63" – 70" / 47 mm x 1,600 mm – 1,778 mm
• Lowered height: 5" / 127 mm
• Width between pads: 31-1/2" / 801 mm
• Lifting time: 45 sec
• Motor: 220 VAC / 60 Hz / 1 Ph
• Shipping weight: 2,318 lbs. / 1,054 kg
• Shipping dimensions: 106" x 76" x 46" / 2,692 mm x 1,930 mm x 1,168 mm

Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

*Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2006 or ANSI/UL 201. Consult www.autolift.org for complete listings or contact Wrenchers Warehouse via contact@wrencherswarehouse.com