The HD-9AE four-post car lifting and alignment system features adjustable multi-position leveling, integrated front radius plates and rear slip plates, making it compatible with all leading alignment instrumentation including 3D and camera wheel alignment systems.

• Multi-caster slip plates in the back and radius plates up front allow for extremely precise, free-floating alignment.
• Dual radius plate positions for better vehicle accommodation.
• Heavy-duty stainless-steel lifting cables provide a great balance of strength, abrasion resistance and fatigue.
• Dual-hub cable sheaves reduce stress, fatigue and wear.
• Grease nipples are located on every sheave and sheave axle to make lubrication maintenance a breeze.
• The HD-9AE features a single hydraulic cylinder hidden away under the runway for maximum performance and reliability and minimum exposure to elements.
• An integrated hydraulic flow restrictor provides a controlled descent in the unlikely event of an unexpected hose rupture.
• A durable powder coat finish can withstand harsh environments and chemical spills and will provide years of protection.
• Spring-loaded safety locks automatically engage continuously during rise and adjustable safety ladders allow for precise runway leveling even when installed on sloped floors.
• A simple push-button pneumatic lock release makes lowering operations simple and fast. Aircraft-quality stainless steel and aluminum pneumatic cylinders will provide years of trouble-free service.
• A secondary lock system is on constant guard and acts as a slack-cable device in the unlikely event of an unexpected cable failure.
• Lifting cables, airlines, safety latches and sheaves are all fully enclosed within lift structure. ­­
• Features multiple adjustable height locking positions for variable-height parking and infinite leveling.
• A maintenance-free electric hydraulic power system assures ultimate dependability.
• All operator controls are conveniently located within easy reach.
• Non-skid runways provides maximum grip, even when the runway surface is wet or oily.

Optional 4,500 lb. capacity rolling jacks (model RJ-45) make a great addition to increase service capacity. Each jack features three safety-lock positions and stackable truck and van adapters for increased lifting height and better access to frame contact points on high ground-clearance vehicles. The jacks come equipped with a commercial grade air-hydraulic pump requiring a maximum pressure of 125 PSI and 10-20 CFM.

*Not all BendPak car hoist models meet the standards as prescribed by AS/NZ 1418.9-(current edition), ANSI/ALI ALCTV-(current edition), ANSI/UL 201. User or Buyer assumes full responsibility for any state, county, federal or international mandated permit, license, code, standard, certification, or any other mandate required related to the installation and/or operation of any BendPak or Ranger product. Read full General Disclaimer details. For more information contact BendPak via: contact@bendpak.com

• 9,000-lb. maximum lifting capacity
• Multi-caster slip plates
• Dual radius plate positions
• heavy-duty stainless steel lifting cables
• Dual-hub cable sheaves
• Grease nipples on every sheave and sheave axle
• Single hydraulic cylinder
• Integrated hydraulic flow restrictor
• Durable powser coat finish
• Spring-loaded safety locks
• Simple push-button lock release
• Aircraft-quality stainless steel and aluminum pneumatic cylinders
• Secondary lock system
• Fully enclosed cables, airlines, safety latches and sheaves
• Multiple adjustable height locking positions
• Maintenance-free power system
• Easy-to-reach operator controls
• Non-skid runways
   

• Overall width: 127" / 3,226 mm
• Outside length: 198" / 5,029 mm
• Overall length: 224" / 5,690 mm
• Height of columns: 88" / 2,235 mm
• Runway min height: 6-1/2" / 165 mm
• Max rise: 70" / 1,778 mm
• Max lifting height: 76-1/2" / 1,943 mm
• Width between posts: 117" / 2,972 mm
• Runway width: 19" / 483 mm
• Width between runways: 40" / 1,016
• Length of runways: 188" / 4,775 mm
• Min. wheelbase @ rated capacity: 135" / 3,429 mm
• Min. wheelbase @ 75% capacity: 115" / 2,921 mm
• Min. wheelbase @ 50% capacity: 95" / 2,413 mm
• Min. wheelbase @ 25% capacity: 80" / 2,032 mm
• Locking positions: 12
• Lock spacing: every 4" / 102 mm
• Lifting time: 60 sec
• Motor: 220 VAC / 60 Hz / 1 Ph

Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

*Not all BendPak car hoist models meet the standards as prescribed by AS/NZ 1418.9-(current edition), ANSI/ALI ALCTV-(current edition), ANSI/UL 201. User or Buyer assumes full responsibility for any state, county, federal or international mandated permit, license, code, standard, certification, or any other mandate required related to the installation and/or operation of any BendPak or Ranger product. Read full General Disclaimer details. For more information contact BendPak via: contact@bendpak.com